GRM155R71C104KA88D MLCC Specifications Applications and Suppliers

ElecSuppliers Part Number GuideAug 15, 2026

GRM155R71C104KA88D is a multilayer ceramic capacitor from Murata and belongs to the GRM series of chip capacitors. Its compact size makes this type of MLCC particularly useful in electronic designs where PCB space is limited.

Unlike a generic capacitor search, the complete GRM155R71C104KA88D part number identifies a specific combination of capacitance, tolerance, voltage and other component characteristics. This is important when the part is already specified in an electronic BOM.

GRM155R71C104KA88D Capacitance

The 104 portion of the part number represents a nominal capacitance of 100 nF or 0.1 µF.

A 100 nF ceramic capacitor is one of the most commonly used capacitance values in electronic circuits. It is frequently selected for local power supply decoupling and high frequency noise suppression.

However, capacitance alone does not determine whether GRM155R71C104KA88D is suitable for a circuit. The rated voltage, tolerance, dielectric characteristics and operating temperature should also be considered.

Why 100 nF MLCCs Are Widely Used

A 100 nF capacitor is often placed close to the power pins of integrated circuits to help reduce high frequency noise and provide local charge during transient changes.

This makes components such as GRM155R71C104KA88D relevant to digital boards, control electronics, communication equipment and other PCB based products.

The small physical size of this type of MLCC also allows designers to position the capacitor close to the device being decoupled.

GRM155R71C104KA88D Part Number

The complete MPN contains several pieces of information about the component.

GRM155 identifies the Murata GRM series and size configuration.

R71 identifies characteristics related to the dielectric system and temperature behavior.

104 indicates the 100 nF capacitance value.

K indicates the capacitance tolerance.

The remaining characters identify additional electrical and ordering characteristics.

For this reason, buyers should use the complete GRM155R71C104KA88D number when looking for the exact component rather than searching only for a 100 nF MLCC.

GRM155R71C104KA88D Applications

This type of capacitor is commonly considered for circuit functions such as power supply bypassing, IC decoupling, noise filtering and general signal stabilization.

The 100 nF value is particularly common around digital integrated circuits, microcontrollers and other active devices.

Actual component selection should be based on the voltage, temperature, capacitance stability and frequency requirements of the circuit.

GRM155R71C104KA88D Supplier Information

When sourcing GRM155R71C104KA88D, buyers should verify the complete manufacturer part number along with its electrical specifications and package requirements.

This is especially important when comparing alternatives because another 100 nF capacitor may have a different voltage rating, dielectric characteristic, tolerance or physical size.

ElecSuppliers provides electronic component product and supplier information, allowing buyers to search for suppliers associated with specific MPNs such as GRM155R71C104KA88D.

For BOM sourcing, keeping the complete part number in the purchasing request helps ensure that the supplier understands exactly which component is required.