GRM155R61A106ME11D MLCC Specifications Applications and Suppliers

ElecSuppliers Part Number GuideAug 15, 2026

GRM155R61A106ME11D is a multilayer ceramic capacitor from Murata's GRM series. It is designed for compact electronic circuits where a surface mount capacitor with a relatively high capacitance value is required.

The complete MPN is important because the GRM series contains many similar looking part numbers. Small changes in the ordering code can represent differences in voltage, tolerance, dielectric characteristics or other specifications.

GRM155R61A106ME11D Capacitance

The 106 section of the part number represents a nominal capacitance of 10 µF.

10 µF is a commonly used value in power supply and decoupling circuits. It can provide local capacitance around integrated circuits and help reduce voltage fluctuations on power rails.

With MLCCs, however, the nominal capacitance does not necessarily remain constant under all operating conditions. DC bias and temperature can influence the effective capacitance, so the expected operating conditions should be considered during component selection.

Understanding the GRM155R61A106ME11D Part Number

The part number provides useful information for identifying the capacitor.

GRM155 identifies the GRM series and package size.

R61 identifies characteristics associated with the capacitor's dielectric system and temperature behavior.

106 represents the 10 µF capacitance value.

M identifies the capacitance tolerance.

The remaining characters provide additional information for identifying the exact electrical and ordering configuration.

This detailed part numbering system is why using the complete GRM155R61A106ME11D designation is recommended when sourcing the component.

GRM155R61A106ME11D Applications

This type of 10 µF MLCC can be considered for power supply bypassing, local decoupling and filtering.

It may be positioned near integrated circuits, regulators and other active components where additional local capacitance is needed.

In switching power applications, designers should consider the capacitor's effective capacitance at the actual operating voltage rather than using the nominal value alone.

GRM155R61A106ME11D PCB Design

The compact package makes GRM155R61A106ME11D suitable for high density PCB layouts.

At the same time, smaller MLCCs require accurate PCB footprints and controlled assembly processes. The recommended land pattern should be checked before production.

When replacing this component, both the electrical specifications and physical dimensions should be matched to the original design.

GRM155R61A106ME11D Suppliers

For buyers searching for GRM155R61A106ME11D suppliers, the complete part number provides the most precise starting point.

Supplier information should be checked against the exact manufacturer, capacitance, tolerance, voltage rating, package and product status.

ElecSuppliers provides electronic component product and supplier information to help buyers locate sources for specific MPNs.

When this capacitor is specified in a production BOM, keeping the complete GRM155R61A106ME11D part number helps avoid confusing it with other 10 µF Murata MLCCs that may have different characteristics.