GCM155R71H104KE02D MLCC Specifications Applications and Suppliers

ElecSuppliers Part Number GuideAug 15, 2026

GCM155R71H104KE02D is a multilayer ceramic capacitor from Murata's GCM series. The GCM family is associated with MLCC products designed for demanding electronic applications, including automotive and other reliability focused systems.

This specific part number is useful for engineers and purchasing teams because the complete MPN identifies the intended capacitor configuration rather than simply describing it as a generic ceramic capacitor.

GCM155R71H104KE02D Capacitance

The 104 section of the part number represents a nominal capacitance of 100 nF or 0.1 µF.

This capacitance value is widely used for high frequency decoupling and noise suppression.

A 100 nF capacitor is commonly placed close to the power pins of integrated circuits because its relatively small capacitance and compact physical size make it useful for reducing high frequency disturbances on power rails.

What Makes GCM155R71H104KE02D Different

The GCM series is particularly relevant to applications where component reliability and environmental performance are important.

The 155 portion identifies the series and package size, while R71 provides information about the dielectric and temperature characteristics.

The H104 portion identifies the capacitance configuration, with 104 representing 100 nF.

The remaining characters specify additional tolerance and ordering information.

When sourcing the component, the entire GCM155R71H104KE02D designation should therefore be retained.

GCM155R71H104KE02D Applications

The 100 nF capacitance makes this MLCC suitable for a range of electronic applications.

It can be used for power supply decoupling, high frequency noise suppression and local bypassing around integrated circuits.

The component can also be considered for automotive electronic modules and other designs where reliable passive components are required under demanding operating conditions.

The actual application should be evaluated against the capacitor's rated voltage, temperature range and environmental requirements.

GCM155R71H104KE02D Automotive Applications

Automotive electronics place additional demands on passive components because systems can experience temperature changes, vibration and electrical transients.

A capacitor from the GCM family can be considered when the design requires an MLCC intended for more demanding environments.

Engineers should still verify the exact qualification, temperature characteristics and applicable specifications of the specific part before using it in an automotive production design.

GCM155R71H104KE02D PCB Design

The compact package allows the capacitor to be placed close to the circuit requiring decoupling.

For high frequency noise suppression, placement is particularly important. Keeping the connection between the capacitor and the IC power path short can help reduce unwanted parasitic inductance.

The recommended PCB footprint should be checked before production, especially when replacing the component with another MLCC.

GCM155R71H104KE02D Supplier Information

Buyers searching for GCM155R71H104KE02D suppliers should provide the complete Murata part number when requesting quotations.

The manufacturer, capacitance, tolerance, rated voltage, package, temperature characteristics and product status should be verified before purchase.

A standard 100 nF MLCC is not necessarily an equivalent replacement because automotive and reliability requirements can differ significantly between capacitor series.

ElecSuppliers provides electronic component product and supplier information for buyers searching for specific MLCC part numbers such as GCM155R71H104KE02D.