CRCW060310K0FKEA Resistor Specifications Applications and Suppliers

CRCW060310K0FKEA is a surface mount chip resistor from Vishay. It is part of the CRCW resistor family and is intended for electronic designs that require a compact passive component for controlling current and establishing defined voltage levels.

The full part number is important when sourcing this resistor because components with the same package size can have substantially different resistance values, tolerances and electrical ratings.

CRCW060310K0FKEA Resistance Value

The 10K0 portion of the part number indicates a nominal resistance of 10 kΩ.

A 10 kΩ resistor is commonly used in voltage divider circuits, signal conditioning, bias networks and control circuits. Its actual function depends on how it is connected within the circuit.

For example, a 10 kΩ resistor can establish a defined voltage at the input of an integrated circuit or work together with another resistor to produce a specific voltage ratio.

CRCW060310K0FKEA Package

The 0603 designation identifies the resistor's compact surface mount package size.

This package is widely used in modern PCB assemblies because it provides a useful balance between board density and automated assembly requirements.

The small footprint allows designers to place multiple resistors close to processors, sensors, connectors and other circuit elements without consuming much PCB area.

CRCW060310K0FKEA Applications

CRCW060310K0FKEA can be used in a variety of electronic circuits where a 10 kΩ surface mount resistor is required.

Common applications include pull up and pull down networks, voltage dividers, transistor biasing, signal conditioning and general circuit configuration.

A 10 kΩ resistor can also be used with capacitors to create RC timing or filtering networks. In such circuits, the resistance value works together with capacitance to determine the resulting time constant.

Why the Complete Part Number Matters

Searching for a 10 kΩ 0603 resistor is not enough to identify a specific production component.

Different manufacturers can offer the same nominal resistance and package while using different tolerances, power ratings, temperature characteristics and construction technologies.

The complete CRCW060310K0FKEA number gives purchasing teams a much more precise reference when matching a BOM or requesting quotations.

CRCW060310K0FKEA PCB Design

The compact 0603 package is well suited to automated SMT production.

During PCB development, the recommended land pattern should be checked to ensure that the resistor can be placed and soldered reliably. Component spacing can also become important when several small passive components are positioned close together.

For high density boards, accurate component placement is particularly useful for maintaining an organized routing layout.

CRCW060310K0FKEA Supplier Information

When sourcing CRCW060310K0FKEA, buyers should provide the complete Vishay part number rather than requesting a generic 10 kΩ chip resistor.

Supplier information should be checked against the required resistance, package, tolerance, power rating and product status.

If an alternative resistor is being considered, its electrical and mechanical characteristics should be compared with the original component before approving it for production.

ElecSuppliers provides electronic component product and supplier information for buyers searching for specific resistor part numbers such as CRCW060310K0FKEA.